Size100
Symbol00995693
Degree of protectionIP40
Standard nominal flow rate (standardised to DIN 1343)50 l/min
Flow rate control range1 l/min ... 50 l/min
Flow directionNon-reversible
Nominal operating pressure43.5 psi
Operating pressure1 bar ... 6 bar
Note on operating pressureFor input pressures above 4 bar and low flow rates: Do not use components that reflect pressure waves in the pneumatic laminar flow inlet. The reflection of pressure waves can cause vibrations in the system and deviations in the accuracy of the product.
Overload pressure116 psi
Burst pressure261 psi
Accuracy of flow rate± (1.3% read + 0.7% FS)
Note on accuracy of flow rateIn the range 2%..100% FS, reference conditions: 23°C ambient temperature and temperature of medium, medium: compressed air ISO 8573-1:2010 [6:4:1], with push-in fitting QS-G1/4-8
Repetition accuracy of flow rate± (0.1% read + 0.1% FS)
Maximum permissible leakage0.6 l/h
Valve function2-way proportional flow control valve
Nominal size6 mm
Type of actuationElectric
Pneumatic connection, port 1Female thread G1/4
Pneumatic connection, port 2Female thread G1/4
Typical precision flow rate value± (0.6 % read + 0.5 %FS)
Environmental conditionsNot suitable for use in an environment enriched with oxygen to IEC 60601-1 Cleanest possible ambient air Dry
Nominal altitude of use<= 2000 m ASL (> 79.5 kPa)
Max. installation height2000 m
Operating mediumArgon Compressed air to ISO 8573-1:2010 [6:4:1] Carbon dioxide Oxygen Nitrogen
Note on operating and pilot mediumLubricated operation not possible Maximum particle size 10 µm
Relative air humidity0 - 90% Non-condensing
Pressure dew point-20 °C
Duty cycle100%
Media temperature5 °C ... 40 °C
Ambient temperature5 °C ... 40 °C
Storage temperature-20 °C ... 70 °C
Nominal operating voltage DC24 V
Operational voltage range DC12 V ... 24 V
Max. electrical power consumption8.5 W
Electrical connection 1, functionCommunication
Electrical connection 1, connection typeSocket
Electrical connection 1, connector systemRJ45
Electrical connection 1, number of connections/cores8
Electrical connection 2, functionAnalogue input Communication Power supply
Electrical connection 2, connection typePlugs
Electrical connection 2, connector systemSub-D
Electrical connection 2, number of connections/cores9
Setpoint value4 - 20 mA 0 - 10 V 1 – 5 V Modbus®
Diagnostic functionDisplay via LED
Display typeLED TFT colour
Signal range analogue input0 - 10 V 4 - 20 mA 1 – 5 V
Signal range analogue output0 - 10 V 1 - 5 V 4 - 20 mA
Reverse polarity protectionFor operating voltage connections
Product weight630 g
Material in contact with the mediumPFPE grease with anorganic thickeners Silicon Silicon nitride High-alloy stainless steel
Material sealsEPDM FPM
Material housingAnodised aluminium PA-reinforced PC POM
Note on materialsRoHS-compliant
Dimensions (W x L x H)116 mm x 38 mm x 124 mm
Type of mountingDirect mounting via through-hole Mounting plate, attached with screws On H-rail via accessories Screw-clamped Via through-hole for M4 screw
Mounting positionoptional
ApprovalC-Tick RCM trademark c UL us listed (OL)
Conforms to standardIEC 61010-1 ISO 15001
KC markKC-EMV
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC To UK RoHS instructions
Certificate issuing authorityUL E322346
LABS (PWIS) conformityVDMA24364 zone III
Oxygen suitability according to standardASTM G 63 ASTM G 93 ASTM G 94 CGA G 4.1 EIGA IGC 33/06/E ISO 15001
.webp)
