Valve function3-way proportional pressure regulator
DesignPiston gate valve With integrated pressure sensors
Type of pilotingDirect
Type of actuationElectric
Type of resetMagnetic spring
Flow directionNon-reversible
Mounting positionoptional
Sealing principleHard
Nominal size6 mm
Short circuit current ratingyes
Display typeLED
Standard nominal flow rate (standardised to DIN 1343)725 l/min
Operating pressure4 bar ... 8 bar
Typical lowering speed15 mm/s
Information on lowering speedWhen the manual exhaust is actuated with cylinder diameter 80 mm, transmission ratio 1:1 and 100 kg load.
Ambient temperature0 °C ... 50 °C
Operating mediumCompressed air to ISO 8573-1:2010 [6:4:4]
Note on operating and pilot mediumMaximum particle size 5 µm
Degree of protectionIP65
Note on degree of protectionIn assembled state
ApprovalRCM trademark
KC markKC-EMV
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
LABS (PWIS) conformityVDMA24364 zone III
Note on materialsRoHS-compliant
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC1 - Low corrosion stress
Instructions on useThe product is suitable for industrial purposes only. Measures to eliminate radio interference may be required in residential areas.
Nominal operating voltage DC24 V
Operational voltage range DC21.6 V ... 26.4 V
Residual ripple5 %
Max. current consumption1.2 A
Current consumption120 mA
Reverse polarity protectionFor operating voltage
Duty cycle100%
Max. electrical power consumption33.5 W
Diagnostic functionDisplay via LED
Max. cable length30 m
Field bus, connection typePlugs
Field bus, connection systemM12x1, A-coded according to EN 61076-2-101
Field bus, connection pattern5
Field bus, protocolCAN bus with Festo protocol
Electrical connection for drive, connection typeSocket
Electrical connection for drive, connection technologyM12x1, A-coded to EN 61076-2-101
Electrical connection for drive, number of pins/wires8
Electrical connection for valve, connection typePlugs
Electrical connection for valve, connection technologyPlug pattern type C to industry standard, 9.4 mm
Electrical connection for valve, number of pins/wires2
Type of mountingDirect mounting via M5 thread
Pneumatic connection, port 1G3/8
Pneumatic connection, port 2G3/8
Pneumatic connection, port 3G3/8
Pneumatic connection for control componentG1/8
Product weight1550 g
Material housingAnodised wrought aluminium alloy
Material sealsFPM HNBR NBR
.webp)
