DesignPinch valve, pneumatically actuated
Type of actuationPneumatic
Sealing principleSoft
Mounting positionoptional
Type of mountingIn-line installation
Connection Process valveClamp to ASME-BPE, type A Clamp to ASME-BPE, type B Clamp to DIN 32676 series A G1/4 G1/2 G1 1/4 NPT 1/2 NPT 1 NPT
Nominal size DN6 15 25
Valve function2/2 open, monostable
Flow directionReversible
Medium pressure0 psi ... 58 psi
Note on the medium pressureUse in the vacuum range was tested up to -0.09 MPa with the air at room temperature. Depending on the application, a counter-vacuum may have to be created on the control side to guarantee the media flow.
Operating pressure14.5 psi ... 94.25 psi
Nominal pressure PN10
Burst pressure232 psi
Overload pressure113.1 psi
Type of resetRebound resilience
Type of pilotingExternally controlled
Auxiliary pilot air port 12M5 G1/8
Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:1] Compressed air to ISO 8573-1:2010 [7:4:4]
Symbol00995245
MediumCompressed air to ISO 8573-1:2010 [-:-:-] Compressed air to ISO 8573-1:2010 [-:-:1] Water
Max. viscosity4000 mm²/s
Media temperature-5 °C ... 150 °C
Ambient temperature-5 °C ... 60 °C
Storage temperature5 °C ... 30 °C
Flow rate Kv0.7 m³/h ... 18 m³/h
Switching time on125 ms ... 250 ms
Switching time off125 ms ... 250 ms
Note on materialsRoHS-compliant
LABS (PWIS) conformityVDMA24364 zone III
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Material housingHigh-alloy stainless steel
Material housing coverPOM High-alloy stainless steel Wrought aluminium alloy
Material sealsFPM
Material shut-off elementEPDM NBR VMQ (silicone)
Product weight56.5 g ... 1876 g
Suitable for use with foodSee supplementary material information See declaration of conformity
Material bowlPA6
.webp)
