Valve function5/2 bistable
Type of actuationElectric
Construction width42 mm
Standard nominal flow rate (standardised to DIN 1343)1300 l/min
pneumatic working portSub-base size 1 to ISO 5599-1 G1/4
Operating voltage24V DC
Operating pressure-0.9 bar ... 16 bar
DesignPiston gate valve
KC markKC-EMV
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Degree of protectionIP65 NEMA 4
Nominal size11 mm
Grid dimension43 mm
Exhaust-air functionWith flow control option Via throttle plate Via individual sub-base
Sealing principleSoft
Mounting positionoptional
Conforms to standardISO 5599-1
Manual overrideDetenting Non-detenting
Type of pilotingPilot actuated
Pilot air supplyExternal
Flow directionoptional
Symbol00995588
lapOverlap
Signal status displayLED
Pilot pressure3 bar ... 10 bar
Flow rate of valve2000 l/min
Flow rate of valve on individual sub-base1400 l/min
Flow rate of pneumatically interlinked valve1300 l/min
Switching time reversal16 ms
Duty cycle100%
Max. positive test pulse with 0 signal1400 µs
Max. negative test pulse with 1 signal900 µs
Characteristic coil data24 V DC: 1.6 W
Permissible voltage fluctuations+/- 10 %
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-5 °C ... 50 °C
Relative air humidity0 - 90%
Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Product weight460 g
Electrical connection3-pin M12x1 Central plug Round design
Type of mountingOn sub-base
Pilot air port 12/14Sub-base size 1 to ISO 5599-1
Pilot exhaust port 82/84Ducted Not ducted as per standard Either:
Pneumatic connection, port 1Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 2Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 3Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 4Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 5Sub-base size 1 to ISO 5599-1
Note on materialsRoHS-compliant
Material sealsFPM HNBR NBR
Material housingDie-cast aluminium PA
Material screwsSteel Galvanised
.webp)
