Outside diameter4 mm
Flow-relevant bending radius16 mm
Inside diameter2.6 mm
Min. bending radius8 mm
Instructions on useTPE-U Ether based
Tubing characteristicsSuitable for energy chains
Operating pressure complete temperature range-13.775 psi ... 87 psi
Temperature-dependent operating pressure-13.775 psi ... 145 psi
Note on operating pressureWater: temperature-dependent operating pressure, see diagram, max. 0.3 MPa at 0–60 °C
ApprovalGerman Technical Control Board (TÜV)
Certificate issuing authorityB 013277 0527 00
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Fire test materialUL94 HB
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Element installed statically, no meaningful evaluation possible according to ISO 14644-1
Suitable for use with foodSee supplementary material information
Product weight according to length0.0085 kg/m
Pneumatic connectionFor push-in connector O.D. 4 mm For push-in connector outside diameter of 5/32" For barbed fitting I.D. 3 mm with union nut
ColourTranslucent blue
Shore hardnessD 52 +/-3
Note on materialsRoHS-compliant
Material tubingTPE-U(PU)
.webp)
