Based on standardEN 61076-2-101
Cable designationWith 2x inscription label holders
Frequency of connection100
Type of mountingVia knurled nut
Product weight828 g
Electrical connection 1, functionField device side
Electrical connection 1, designRound
Electrical connection 1, connection typeSocket
Electrical connection 1, cable outletStraight
Electrical connection 1, connector systemM12x1, A-coded to EN 61076-2-101
Electrical connection 1, number of connections/cores5
Electrical connection 1, used connections/cores5
Electrical connection 1, type of mountingScrew-type lock Rotatable
Electrical connection 1, compatible type of mountingCompatible with rotatable/non-rotatable screw-type lock
Electrical connection 1, connection pattern00995384
Electrical connection 1, terminal allocationPin 1 = BN Pin 2 = WH Pin 3 = BU Pin 4 = BK Pin 5 = GY
Electrical connection 2, functionController side
Electrical connection 2, connection typeCable
Electrical connection 2, connector systemOpen end
Electrical connection 2, number of connections/cores5
Electrical connection 2, used connections/cores5
Operational voltage range DC0 V ... 60 V
Operational voltage range AC0 V ... 48 V
Current rating at 40° C4 A
Immunity to surge1.5 kV
Protective conductor connectionNot available
Shieldingyes
Cable length15 m
Cable characteristicSuitable for energy chains
Test conditions cableTest conditions on request
Bending radius, fixed cable≥26 mm
Bending radius, moving cable≥52 mm
Cable diameter5.25 mm
Cable diameter tolerance± 0.2 mm
Cable structure5 x 0.34 mm²
Nominal cross section conductor0.34 mm²
Conductor nominal cross sectionAWG22
Wire endsCut off bluntly
Degree of protectionIP65 IP67
Note on degree of protectionIn assembled state
Special characteristicsUV resistant Abrasion-resistant Low adhesion Flame-retardant and self-extinguishing Hydrolysis-resistant Alkali resistant Solvent-resistant Resistant to microbes Oil resistant Acid resistant
Ambient temperature with moving cable-25 °C ... 60 °C
Overvoltage categoryII
CE mark (see declaration of conformity)In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
LABS (PWIS) conformityVDMA24364-B2-L
Note on materialsRoHS-compliant Free of halogen Silicone free
Pollution degree3
Note on the contamination levelIn mounted state
Corrosion resistance class CRC1 - Low corrosion stress
Material cable sheathTPE-U(PUR)
Cable sheath colourBlack
Material housingTPE-U(PUR)
Housing colourBlack
Material screw-type lockDie-cast zinc, nickel-plated
Material sealsNBR
Material electrical contactNickel-plated and gold-plated bronze
Material insulating sheathPP