Based on standardEN 61076-2-111
Approvalc UL us listed (OL)
Certificate issuing authorityUL E504946
Cable designationWithout inscription label holder
Product weight1556 g
Electrical connection 1, functionField device side
Electrical connection 1, designRound
Electrical connection 1, connection typeSocket
Electrical connection 1, cable outletAngled
Electrical connection 1, connector systemM12x1, T-coded according to EN 61076-2-111
Electrical connection 1, number of connections/cores4
Electrical connection 1, used connections/cores4
Electrical connection 1, type of mountingScrew-type lock
Electrical connection 1, connection patternSocket, M12x1 T-coded according to EN 61076-2-111, 4-pin
Electrical connection 2, functionController side
Electrical connection 2, connection typeCable
Electrical connection 2, connector systemOpen end
Electrical connection 2, number of connections/cores4
Electrical connection 2, used connections/cores4
Operational voltage range DC0 V ... 63 V
Current rating at 40° C12 A
Immunity to surge1.5 kV
Shieldingno
Cable length15 m
Cable characteristicSuitable for energy chains
Test conditions cableTest conditions on request
Bending radius, fixed cable≥34 mm
Bending radius, moving cable≥68 mm
Cable diameter6.75 mm
Cable diameter tolerance± 0.2 mm
Cable structure4 x 1.5 mm²
Nominal cross section conductor1.5 mm²
Wire endsSheath removed
Degree of protectionIP65 IP67
Note on degree of protectionIn assembled state
Ambient temperature-50 °C ... 85 °C
Ambient temperature with moving cable-30 °C ... 85 °C
CE mark (see declaration of conformity)In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
LABS (PWIS) conformityVDMA24364-B2-L
Note on materialsRoHS-compliant
Pollution degree3
Corrosion resistance class CRC2 - Moderate corrosion stress
Material cable sheathTPE-U(PUR)
Cable sheath colourBlack
Material housingPA
Housing colourBlack
Material screw-type lockDie-cast zinc, nickel-plated
Material sealsNBR
Material electrical contactBrass
Material insulating sheathPP
.webp)
