Symbol00995686
ApprovalRCM trademark c UL us listed (OL)
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Certificate issuing authorityUL E322346
Note on materialsRoHS-compliant
Measured variableRelative pressure
Measurement methodPiezoresistive pressure sensor
Start value for pressure measuring range0 psi
End value for pressure measuring range-14.5 psi
Max. overload pressure5 bar
Overload pressure72.5 psi
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Inert gas
Note on operating and pilot mediumLubricated operation possible
Media temperature0 °C ... 50 °C
Ambient temperature0 °C ... 50 °C
Accuracy in ± % FS1.5 %FS
Repetition accuracy in ± %FS0.3 %FS
Temperature coefficient in ± %FS/K0.05 %FS/K
Switching output2 x PNP or 2 x NPN, switchable
Switching functionWindow comparator Threshold value comparator Auto difference monitoring
Switching element functionN/C or N/O contact, switchable
Max. output current100 mA
Short circuit current ratingyes
Operational voltage range DC15 V ... 30 V
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typePlugs
Electrical connection 1, connector systemConnection pattern L1J
Electrical connection 1, number of connections/cores4
Electrical connection 1, connection pattern00995428
Type of mountingFront panel mounting Via thread Via wall/surface bracket
Mounting positionoptional
Pneumatic connectionMale thread R1/8 Female thread M5
Product weight46 g
Material housingPA-reinforced
Material in contact with the mediumFPM High-alloy stainless steel
Display typeIlluminated LCD
Displayable unitsMPa bar inH2O inHg kPa kgf/cm² mbar mmHg psi
Setting optionsTeach-in Via display and keys
Protection against tamperingPIN code
Setting range threshold value0 % ... 100 %
Setting range hysteresis0 % ... 90 %
Degree of protectionIP40
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
.webp)
