DesignFor T-slot
Symbol00992260
ApprovalRCM trademark c UL us listed (OL)
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Certificate issuing authorityUL E232949
Note on materialsRoHS-compliant Free of halogen
Instructions on usehttps://www.festo.com/Drive-Sensor-Overview
Measured variablePosition
Measuring principleMagnetic Hall
Sensing range≤52000 µm
Ambient temperature-40 °C ... 80 °C
Typical sampling interval2 ms
Max. travel speed3 m/s
Displacement resolution≤0.02 mm
Repetition accuracy0.2 mm
Analogue output0 - 10 V
Typical linearity error± 1 mm
Short circuit current ratingyes
Overload protectionAvailable
Output signalAnalogue
Operational voltage range DC15 V ... 30 V
Residual ripple10 %
No-load supply current<12 mA
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable with plug
Electrical connection 1, connector systemM8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores4
Electrical connection 1, type of mountingRotatable
Electrical connection 1, compatible type of mountingCompatible with rotatable/non-rotatable screw-type lock
Electrical connection 1, connection pattern00991171
Connection outlet orientationIn-line
Material electrical contactGold-plated copper alloy
Material screw-type lockNickel-plated brass
Test conditions cableBending strength: to Festo standard Torsional strength: > 300,000 cycles, ±270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm
Cable length0.3 m
Cable characteristicSuitable for energy chains/robot applications
Cable sheath colourGrey
Material cable sheathTPE-U(PUR)
Type of mountingScrew-clamped Insertable in the slot from above
Mounting positionoptional
Product weight9.5 g
Material housingHigh-alloy stainless steel
Status indicationLED red, green
Ambient temperature with moving cable-20 °C ... 70 °C
Degree of protectionIP65 IP68
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Element installed statically, no meaningful evaluation possible according to ISO 14644-1
.webp)
