DesignFor C-slot
Conforms to standardEN 60947-5-2
Symbol00991144
ApprovalRCM trademark
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
KC markKC-EMV
Special characteristicsOil resistant
Note on materialsRoHS-compliant Free of halogen Free of copper
Instructions on useCable flame-protected and flame-retardant as per UL Standard 758 Horizontal Flame Test, does not comply with fire protection to IEC 61010-1:2017, Edition 3.1, Section 9.3.
VariantsMetals with copper, zinc or nickel by mass as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils.
Measured variablePosition
Measuring principleMagneto-resistive
Ambient temperature-20 °C ... 70 °C
Repetition accuracy0.2 mm
Switching outputNon-contacting, 2-wire
Switching element functionN/O contact
Switch-on time≤2.5 ms
Switch-off time≤2.5 ms
Max. switching frequency480 Hz
Max. output current50 mA
Max. switching capacity DC1.4 W
Voltage drop≤2.8 V
Short circuit current ratingno
Overload protectionNo
Rated operational voltage DC24 V
Operational voltage range DC10 V ... 28 V
Reverse polarity protectionno
Electrical connection 1, connection typeCable
Electrical connection 1, connector systemOpen end
Electrical connection 1, number of connections/cores2
Connection outlet orientationIn-line
Material screw-type lockHigh-alloy stainless steel
Cable length2 m
Cable characteristicStandard Suitable for energy chains
Material cable sheathPUR
Material insulating sheathPP
Wire endsCut off bluntly
Type of mountingScrew-clamped Insertable in the slot from above
Max. tightening torque0.2 Nm
Mounting positionoptional
Product weight17 g
Material housingPC
Switching status indicationYellow LED
Ambient temperature with moving cable-20 °C ... 70 °C
Degree of protectionIP67 IP68 To IEC 60529
LABS (PWIS) conformityVDMA24364 zone III
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Element installed statically, no meaningful evaluation possible according to ISO 14644-1
.webp)
