DesignFor T-slot
Based on standardEN 60947-5-2
Symbol00995965
ApprovalRCM trademark c UL us listed (OL)
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Certificate issuing authorityUL E232949
Note on materialsRoHS-compliant Free of halogen
Instructions on usehttps://www.festo.com/Drive-Sensor-Overview
Measured variablePosition
Measuring principleMagnetic Hall
Ambient temperature-40 °C ... 85 °C
Max. travel speed3 m/s
Repetition accuracy0.1 mm
Switching outputPNP/NPN, switchable
Switching element functionN/O or N/C contact, switchable
Hysteresis0.2 mm
Switch-on time≤2 ms
Switch-off time≤2 ms
Max. switching frequency200 Hz
Max. output current100 mA
Max. output current using mounting kits100 mA
Max. switching capacity DC2.8 W
Max. switching capacity DC using mounting kits2.8 W
Voltage drop<1.5 V
Min. load current0.15 mA
Off-state current<0.2 mA
Short circuit current ratingyes
Overload protectionYes
Rated operational voltage DC24 V
Operational voltage range DC10 V ... 30 V
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable
Electrical connection 1, connector systemOpen end
Electrical connection 1, number of connections/cores3
Connection outlet orientationIn-line
Test conditions cableBending strength: to Festo standard Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm
Cable length5 m
Cable characteristicSuitable for energy chains/robot applications
Cable sheath colourGrey
Material cable sheathTPE-U(PUR)
Wire endsWire ferrule
Type of mountingScrew-clamped Insertable in the slot from above
Max. tightening torque0.6 Nm
Mounting positionoptional
Product weight56 g
Housing colourBlack
Material housingHigh-alloy stainless steel
Switching status indicationYellow LED
Status indicationGreen LED
Setting optionsAuto teach-in Capacitive pushbutton
Ambient temperature with moving cable-20 °C ... 85 °C
Degree of protectionIP65 IP68 IP69K
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Element installed statically, no meaningful evaluation possible according to ISO 14644-1
.webp)
