DesignFor T-slot
Based on standardEN 60947-5-2
Symbol00991152
ApprovalRCM trademark c UL us listed (OL)
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Certificate issuing authorityUL E232949
Special characteristicsOil resistant
Note on materialsRoHS-compliant Free of halogen
Instructions on usehttps://www.festo.com/Drive-Sensor-Overview
Measured variablePosition
Measuring principleMagneto-resistive
Ambient temperature-40 °C ... 85 °C
Repetition accuracy0.2 mm
Switching outputPNP
Switching element functionN/O contact
Switch-on time≤1.3 ms
Switch-off time≤7.3 ms
Max. switching frequency130 Hz
Max. output current100 mA
Max. output current using mounting kits100 mA
Max. switching capacity DC2.8 W
Max. switching capacity DC using mounting kits2.8 W
Voltage drop<1.5 V
Short circuit current ratingyes
Overload protectionYes
Rated operational voltage DC24 V
Operational voltage range DC5 V ... 30 V
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable
Electrical connection 1, connector systemOpen end
Electrical connection 1, number of connections/cores3
Connection outlet orientationIn-line
Test conditions cableTest conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Flexural strength: >50000 cycles, bending radius 5 mm Energy chain: > 5 million cycles, bending radius 28 mm
Cable length5 m
Cable characteristicSuitable for energy chains/robot applications
Cable sheath colourGrey
Material cable sheathTPE-U(PUR)
Material insulating sheathPP
Wire endsWire ferrule
Type of mountingScrew-clamped Insertable in the slot from above
Max. tightening torque0.6 Nm
Mounting positionoptional
Product weight57.1 g
Housing colourBlack
Material housingHigh-alloy stainless steel
Switching status indicationYellow LED
Function reserve indicationOrange LED
Ambient temperature with moving cable-20 °C ... 85 °C
Degree of protectionIP65 IP68 IP69K
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Element installed statically, no meaningful evaluation possible according to ISO 14644-1
.webp)
