Valve function2/2-way, closed, monostable
Operating pressure0 psi ... 7.25 psi
Internal volume113 µl valve with fluid connections
Nominal size0.8 mm
Nominal width of dosing needle1 mm
Length of dosing needle30 mm
Grid dimension9 mm
Sealing principleSoft
Mounting positionoptional
Type of resetMechanical spring
Type of pilotingDirect
Water flow rate at max. operating pressure2000 µl/s
Min. dosing volume5 µl
Note on dosing volumeDepends on configuration, environment and application
Typical dosing precision<1% CV für Volumina >5 µl <2.5% CV for volumes between 1-5 µl
Note on dosing precisionDepends on configuration, environment and application
Max. switching frequency4 Hz
Note on switching frequencyDependent on the ambient temperature and installation state
Switching time on7 ms
Note on switching time onDepends on configuration, environment and application
Switching time off2 ms
Note on switching time offDepends on configuration, environment and application
Duty cycle100% with individual mounting 50% in case of block mounting (max. switch-on time 1 s)
Electrical power consumption1.8 W
Nominal operating voltage DC24 V
Permissible voltage fluctuations+/- 10 %
MediumLiquid media
Note on the mediumObserve resistance of materials that come into contact with the media
Instructions on useSee application note (available on the Support Portal at festo.com)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Storage temperature-20 °C ... 70 °C
Media temperature5 °C ... 50 °C
Degree of protectionIP30
Note on degree of protectionIn assembled state
Ambient temperature5 °C ... 40 °C
Product weight18 g
Electrical connectionCable Open end
Cable length0.15 m
Wire endsSheath removed
Conductor nominal cross sectionAWG28
Type of mountingVia female thread and centring sleeve
Fluid connectionUNF1/4-28
Note on fluid connectionFitting enclosed for tubing with 3 mm outside diameter
Material of dosing needleHigh-alloy stainless steel
Material number of dosing needle1.4301
Note on materialsRoHS-compliant
Material in contact with the mediumPPS High-alloy stainless steel
Type of actuationElectric
Nominal altitude of use<= 2000 m NHN
Relative air humidityNon-condensing
Pollution degree2
.webp)
