Size20
Inverting cap versionStandard
Stroke66 mm
Min. ø to be gripped12 mm
Max. ø to be gripped38 mm
Drive systemPneumatic
Mounting positionoptional
Mode of operationDouble-acting
Gripper functionAdaptive
DesignForce pilot operated motion sequence
GuideBasic guide
Position detectionVia proximity switch
Symbol00997278
Pick-up tolerance±4 mm
Placement tolerance±2 mm
Operating pressure of ball valve drive unit1 bar ... 8 bar
Operating pressure of cap0.07 bar ... 0.1 bar
Burst pressure of cap0.3 bar
Recommended flow rate for pressure regulator10 l/min
Max. operating frequency of gripper1 Hz
Return-stroke time290 ms
Advance time270 ms
Max. speed without gripped object290 mm/s
Max. speed during gripping120 mm/s
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation not possible
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Suitable for use with foodSee supplementary material information
Ambient temperature0 °C ... 60 °C
Mass moment of inertia1.29 kgcm²
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke158 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke189 N
Dynamic lateral force with max. projection2.3 N
Contact force on the gripping object20 N
Static holding force parallel to the gripper axis26 N
Static holding force perpendicular to the gripper axis45 N
Impact energy in end positions0.1 J
Guide value for effective load1 kg
Product weight475 g
Moving mass60 g
Note on the moving massWithout inverting cap
Type of mountingTo ISO 9409
Pneumatic connectionM5
Note on materialsRoHS-compliant
Material capVMQ (silicone)
Material housingAnodised aluminium
Locking cover materialPA
.webp)
