Nominal size6 mm
Type of actuationElectric
Sealing principleHard
Mounting positionoptional Preferably horizontal (display elements facing upwards) If the valve is moved, it must be mounted at a right angle to the direction of movement
DesignPiston gate valve With integrated pressure sensors
Type of resetMagnetic spring
Safety instructionsSafety position VPWP: if there is a problem with the control interface, the valve assumes the closed mid-position.
Type of pilotingDirect
Flow directionNon-reversible
Symbol00992136
Valve function5/3-way proportional directional control valve, closed
Status displaysLED yellow = PL (power load) LED green = power LED red = error
Operating pressure0 bar ... 10 bar
Operating pressure positioning/Soft Stop4 bar ... 8 bar
Nominal operating pressure87 psi
Standard nominal flow rate (standardised to DIN 1343)700 l/min
Nominal operating voltage DC24 V
Operational voltage range DC18 V ... 30 V
Load voltage range DC18 V ... 30 V
Max. load current of the voltage output500 mA
Max. load current of the digital output500 mA
Max. current consumption of valve drive1.2 A
Max. current consumption, logic0.15 A
Nominal load voltage DC24 V
Supply voltage of the digital output24 V load voltage
Supply voltage of the voltage output24 V load voltage
ApprovalRCM trademark
CE mark (see declaration of conformity)To EU EMC Directive To EU Explosion Protection Directive (ATEX) In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Explosion protectionZone 2 (ATEX)
ATEX category gasII 3G
Explosion ignition protection type for gasEx nA IIC T5 X Gc
Explosion ambient temperature0°C <= Ta <= +50°C
Operating mediumCompressed air to ISO 8573-1:2010 [6:4:4]
Note on operating and pilot mediumLubricated operation not possible
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature0 °C ... 50 °C
Degree of protectionIP65 In assembled state
Ambient temperature0 °C ... 50 °C
Product weight776 g
Pressure resolution0.01 bar
Linearity error in ± %FS<1.5 %
Repetition accuracy FS<1 %
Design of the 24 V voltage outputReverse supply with no damage No galvanic isolation Protected against short circuits Reverse supply with no damage
Digital output designTo IEC 61131-2 Positive logic (PNP) No galvanic isolation Protected against short circuits Reverse supply with no damage
Control-InterfaceDigital CAN bus with Festo protocol Integrated terminating resistor
Electrical connection fieldbus interface INPlugs M9 5-pin
Electrical connection fieldbus interface OUTSocket M9 5-pin
Fieldbus interface electrical connectionSocket M8 4-pin
Type of mountingWith through-hole With accessories
Colour of connectionsPort 2: Blue Connection 4: black
Pneumatic connection, port 1G1/8
Pneumatic connection, port 2G1/8
Pneumatic connection, port 3G1/8
Pneumatic connection, port 4G1/8
Pneumatic connection, port 5G1/8
Note on materialsRoHS-compliant
Material coverPA-reinforced
Material housingWrought aluminium alloy Anodised
.webp)
