Min. stroke limit (hard)101 mm
Stroke101 mm ... 200 mm
Max. stroke limit (hard)200 mm
Adjustable end-position range/length10 mm
Piston diameter25 mm
Operating mode, drive unitYoke
CushioningElastic cushioning rings/plates at both ends
Mounting positionoptional
GuidePlain-bearing guide
DesignGuidance
Position detectionVia proximity switch
Symbol00991249
Operating pressure1 bar ... 8 bar
Mode of operationDouble-acting
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Cleanroom suitability, measured according to ISO 14644-14Class 5 according to ISO 14644-1
Ambient temperature-10 °C ... 80 °C
Impact energy in end positions0.3 J
Max. effective load dependent upon stroke at defined distance xs2.5 N ... 7.2 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke454 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke590 N
Moving mass391 g ... 569 g
Moving mass for 0 mm stroke209 g
Additional moving mass per 10 mm stroke18 g
Product weight1099 g ... 1623 g
Basic weight for 0 mm stroke563 g
Additional weight per 10 mm stroke53 g
Pneumatic connectionG1/8
Note on materialsRoHS-compliant
Material coverWrought aluminium alloy
Material sealsNBR
Material housingAnodised wrought aluminium alloy
Material piston rodHigh-alloy stainless steel
.webp)
