Stroke10 mm
Adjustable end-position range/length10 mm
Piston diameter25 mm
Operating mode, drive unitTwo yokes
CushioningElastic cushioning rings/plates at both ends
Mounting positionoptional
GuidePlain-bearing guide
DesignGuidance
Position detectionVia proximity switch
Symbol00991243
Operating pressure1.2 bar ... 8 bar
Mode of operationDouble-acting
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Cleanroom suitability, measured according to ISO 14644-14Class 5 according to ISO 14644-1
Ambient temperature-10 °C ... 80 °C
Impact energy in end positions0.3 J
Max. effective load dependent upon stroke at defined distance xs33.5 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke454 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke454 N
Moving mass354.6 g
Product weight953 g
Pneumatic connectionG1/8
Note on materialsRoHS-compliant
Material coverWrought aluminium alloy
Material sealsNBR
Material housingAnodised wrought aluminium alloy
Material piston rodHigh-alloy stainless steel
.webp)
