Size of valve actuator200
Flange hole patternF10
Stroke350 mm
Piston diameter200 mm
Fitting connection conforms to standardISO 5210
CushioningElastic cushioning rings/plates at both ends
Mounting positionoptional
Mode of operationDouble-acting
DesignPiston Piston rod Tie rod Cylinder barrel
Position detectionVia proximity switch
Symbol00991217
Operating pressure29 psi ... 116 psi
Nominal operating pressure87 psi
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 1 to FN 942017-5 and EN 60068-2-27
LABS (PWIS) conformityVDMA24364 zone III
Ambient temperature-20 °C ... 80 °C
Impact energy in end positions4.8 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke18096 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke18850 N
Air consumption on return stroke per 10 mm2.111 l
Air consumption on advance stroke per 10 mm2.199 l
Moving mass for 0 mm stroke3575.4 g
Additional moving mass per 10 mm stroke105.31 g
Product weight19210 g
Basic weight for 0 mm stroke10258.2 g
Additional weight per 10 mm stroke255.79 g
Type of mountingOn flange as per ISO 5210 With spacer bolt
Pneumatic connectionG1/4
Note on materialsRoHS-compliant
Material coverGravity die-cast aluminium
Material piston rodHigh-alloy stainless steel
Material piston rod wiperTPE-U(PU)
Material nutHigh-alloy stainless steel
Material static sealsNBR
Material tie rodHigh-alloy stainless steel
Material cylinder barrelSmooth-anodised wrought aluminium alloy
.webp)
