Size of valve actuator0008
Flange hole patternF03
Swivel angle90 deg
Shaft connection depth10.1 mm
Fitting connection conforms to standardISO 5211
CushioningNo cushioning
Mounting positionoptional
Mode of operationDouble-acting
DesignScotch yoke system
Position detectionWithout
Closing directionCloses to the right
Symbol00991265
Valve connection conforms to standardVDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)To SIL 2 Low Demand mode
Operating pressure1 bar ... 8.4 bar
Nominal operating pressure5.6 bar
Max. swivel frequency at 0.6 MPa (6 bar, 87 psi)1 Hz
CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity)To UK EX instructions
Explosion protectionZone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
Certificate issuing authorityGerman Technical Control Board North (TÜV Nord) 212170801
ATEX category gasII 2G
ATEX category dustII 2D
Explosion ignition protection type for gasEx h IIC T6...T3 Gb X
Explosion ignition protection type for dustEx h IIIC T85°C...T200°C Db X
Explosion ambient temperature-20°C <= Ta <= +60°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC3 - high corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Ambient temperature-20 °C ... 80 °C
Torque at nominal operating pressure and 0° swivel angle7 Nm
Torque at nominal operating pressure and 50° swivel angle3.5 Nm
Torque at nominal operating pressure and 90° swivel angle7 Nm
Note on torqueThe operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°0.24 l
Product weight300 g
Shaft connectionT9
Pneumatic connectionG1/8
Note on materialsRoHS-compliant
Material coverWrought aluminium alloy
Material sealsFPM NBR PUR
Material housingWrought aluminium alloy
Material screwsHigh-alloy steel
Material shaftHigh-alloy steel
Material number shaft1.4305
.webp)
