Working stroke500 mm
Size120
Stroke reserve0 mm
Reversing backlash theoretical≤150 µm
Spindle diameter15 mm
Spindle pitch20 mm/U
Mounting positionoptional
GuideRecirculating ball bearing guide
DesignElectromechanical linear axis With ball screw
Type of motorStepper motor Servo motor
Spindle typeBall screw
Symbol00991211
VariantsMetals with copper, zinc or nickel by mass as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils.
Max. acceleration15 m/s²
Max. rotational speed3000 rpm
Max. speed1 m/s
Repetition accuracy±0.02 mm
Duty cycle100%
LABS (PWIS) conformityVDMA24364 zone III
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Class 8 according to ISO 14644-1
Degree of protectionIP20
Ambient temperature0 °C ... 50 °C
Continuous feed force805 N
2nd moment of area Iy966000 mm⁴
2nd moment of area Iz6011000 mm⁴
Idle torque at vmax0.3 Nm
Idle torque at vmin0.08 Nm
Max. force Fy6800 N
Max. force Fz8090 N
Fy at theoretical life value of 100 km (only guide consideration)25051 N
Fz at theoretical life value of 100 km (only guide consideration)29804 N
Max. moment Mx300 Nm
Max. moment My310 Nm
Max. moment Mz310 Nm
Mx at theoretical life value of 100 km (only guide consideration)1105 Nm
My at theoretical life value of 100 km (only guide consideration)1142 Nm
Mz at theoretical life value of 100 km (only guide consideration)1142 Nm
Max. radial force at drive shaft290 N
Max. feed force Fx805 N
Torsional mass moment of inertia It506000 mm⁴
Mass moment of inertia JH per metre of stroke0.2522 kgcm²
Mass moment of inertia JL per kg of working load0.1013 kgcm²
Mass moment of inertia JO0.2654 kgcm²
Feed constant20 mm/U
Moving mass2036 g
Product weight11331 g
Basic weight for 0 mm stroke5235 g
Additional weight per 10 mm stroke124 g
Dynamic deflection (moving load)0.05% of the axis length, max. 0.5 mm
Static deflection (load in standstill)0.1% of the axis length
Interface code, actuatorT46
Material end capPainted die cast aluminium
Material profileAnodised wrought aluminium alloy
Note on materialsRoHS-compliant
Material drive coverPainted die cast aluminium
Material guide slideSteel
Material guide railSteel
Material slideAnodised wrought aluminium alloy
Material ball screw nutSteel
Material spindleSteel
.webp)
